- Universally applicable
- High balancing accuracy
- Easy upgrading through modular structure and a wide range of accessories
- Hard-bearing principle ensures fast change-over
- Schenck measuring instrument with Schenck ONE Software
- Extensive safety equipment for all protection classes
Special features
- Easy to operate – hard-bearing principle eliminates the need for calibration runs
- Provides for correction in two planes or separate according to static and couple unbalance
- Rotors can be mounted on their original shafts or on mounting arbors, optionally with mounted anti-friction bearings
- Angle indexing display in case of belt drive
- Automatic measuring cycle with infinitely variable settings for acceleration, measuring and braking time
- Upgradeable by many additional modules e.g. for mass correction
Design
Range of application
Universal balancing machines series HM enable precise balancing of a wide spectrum of rotors. They are suitable for cylindrical rotors having their own shaft journals and for balancing disc shaped rotors on balancing arbors.
Permanent calibration, ergonomic design and a logical operating sequence facilitate operation.
A modular design principle and a wide range of accessories make the machine highly flexible.
Schenck universal balancing machines series HM are a highly efficient investment, both for one-off rotors and for small batches.
Sequence of operations
- Manually load work-piece on the bearing pedestals, close hold-down bearings and connect drive (belt drive or drive shaft).
- Close protection device and start automatic measuring sequence:
- Acceleration, determination and display of the unbalance on the measuring instrument, brake. The readout is retained on the measuring instrument even after the measuring run has ended.
- Open protection device, manually correct unbalance (if required).
- Check correction result (with measuring instrument displaying whether the tolerance has been achieved) and unload the rotor from the machine.
Technical data
| Technical data at a glance | Pasio 100 | Pasio 300 | Pasio 700 | |
| Measuring unit | Schenck ONE | Schenck ONE | Schenck ONE | |
| Roller carriages | • | • | • | |
| Underslung belt drive BU | • | • | • | |
| End drive 2) | • | • | ||
| Protective device as per ISO 7475 5) | • | • | • | |
| Rotor | ||||
| Weight, max. | [kg] | 100 | 300 | 700 |
| Diameter, max. | [mm] | 1260 | 1260 | 1260 |
| Bearing distance, max. 2) | [mm] | 1330 | 1330 | 1330 |
| Bearing journal diameter 2) | [mm] | 9 - 140 | 9 - 140 | 10 - 160 |
| Machine | ||||
| Width A 1) | [mm] | 2250 | 2250 | 2250 |
| Depth B 1) | [mm] | 1650 | 2250 | 2250 |
| Height C 1) | [mm] | 2000 | 2000 | 2000 |
| Balancing speed, min. | [min -1] | 120 | 120 | 120 |
| MARU 4) | [gmm] | 1,6 | 2,0 | 3,0 |
| Air pressure | [kPa] | - | 600 | 600 |
| Power supply 3) | [V] | 400 3) | 400 3) | 400 3) |
| Drive power | [kW] | 1,1 | 2,2 | 2,2 |
| Sound Pressure Level (with belt drive) | [LpA [dB(A)]] | 60 - 70 | 60 - 70 | 60 - 70 |
| Order-Nr. | R0060400.03 | R0060500.03 | R0060600.03 | |
| Software options | o.r. | o.r. | o.r. | |
| Angular roller bearings | • | • | • | |
| Overslung belt drive BK | • | • | • | |
| Various roller carriages | o.r. | o.r. | o.r. | |
| Report printer | Order-Nr. | R0060465.01 | R0060506.01 | R0060606.01 |
| Mass correction system | Order-Nr. | o.r. | o.r. | o.r. |
| 2) Other data upon request | ||||
| 3) Mains configuration: 3 / PE AC 500Hz 400 V +6 / -10% | ||||
| 4) Minimum achievable residual anbalance per balancing plane | ||||
| 5) Up to HM 10 with protection class C, in all other cases protection class B | ||||
| o.r. On request |
