Geometry Measuring Machines GS 1000

Measurement of axial and radial runout
FFT analysis
Measurement of rotors with varying diameters
Fully automatic sequence of operations
Interfacing with production lines
Integration into vertical-axis balancing machines
Separate machines available for short cycle times
NC control
PC based measurement instrument

Design

Integrated into a vertical-axis balancing machine or as a seperate station
Fully automatic sequence of operations with freely progammable controller with fault diagnosis
Evaluation by means of PC
Work-piece clamping and measurement of required features
Manual loading of machine, optionally with handling and conveyor equipment

Design

Range of application

Measurement of diameter an runout including FFT analysis on brake discs, torque converters, pulleys, shafts and clutch discs.

Depending on application, the measuing system may be integrated into a single- or multi-station vertical-axis balancing machine. If shorter cycle times are required, a seperate machine should be used

Technical data

Measuring unit		Measuring system Integrated in vertical machines CAB 950 V	Stationary systems Type GS 1000 Torque converter CAB 950 Diagnosis	Stationary systems Type GS 1000 Brake disk CAB 950 Diagnosis
Integrated measurement		•
Separate measuring system			•	•
Manual loading		•	•	•
Automatic loading		•	•	•
Rotor
Pulleys, flywheels		•
Vibration dampers, fans, turbines		•
Torque converters			•
Brake discs				•
Weight	[kg]	up to 100 kg	up to 50 kg	up to 50 kg
Diameter, max.	[mm]	600	400	400
Height, max.	[mm]	200	300	300
Machine
Width A	[mm]	2100	2100	2100
Depth B	[mm]	3300	3300	3300
Height C	[mm]	2600	2600	2600
Radial runout		•	•	•
Axial runout		•	•	•
Diameter determination		•	•	•
Waviness				•
Concentricity				•
Roundness			•
FFT analysis				•
Temperature coefficient				•
Axial play (bearing play)			•

Basic machine	Order-Nr.	R1000100.01	R1000200.01	R1000300.01

This system determines the characteristics of a brake disc. The machine works fully automatically and is loaded by means of a handling system. Characteristics measured include: Lateral and radial runoutWavinessDiameterFFT analysisInclusion of temperature coefficient
Runout measurement on gearbox components integrated in a fully automatic vertical balancing machine.Runout is measured during the unbalance measurement run. If unbalance and runout are within tolerance, the work-piece is deposited on the „Within Tolerance“ conveyor.
Measurements on torque converters. The geometry measuring machine is loaded and unloaded automatically. Characteristics determined include:Lateral runout and roundness of arbor/flangeArbor/flange diameterRunout of driver flangeAxial play of inner turbine (bearing play)
The torque converter is driven from the outside through a drive wheel. Characteristics are determined mechanically and optically. The movable spindle sleeve arranged from above is used to measure the axial play of the inner turbine on the non-rotating converter.

Cookie settings

Required

Analysis

Functionality

Required

These Cookies make a website usable by providing basic functions such as page navigation, language settings, and access to protected areas. As the website is unable to function properly without them, you cannot opt out of this kind of Cookies.

Analysis

These Cookies allow us, and the service providers (e.g. Piwik Pro) to collect and analyze information and statistics about your interaction with our website. This helps to optimize our website using the findings obtained.

Functionality

These Cookies help us to improve the functionality and attractiveness of our websites, and your user experience by saving, for example, your settings, and selections as well as filters, and to recognize your device on subsequent visits.

Data protection Imprint

Cookie settings

We use cookies and similar technologies on this website. In order to allow their use to analyze website usage and to enhance functionality, please click on “Accept”.

To change the settings and select which specific Cookies we are allowed to use, or to obtain more detailed information, please click on “Details”.

Data protection Imprint